Toro 30667, Installation Instructions Manual, Page: 18 / 20

g032311
Figure 36
Right side shown
1. Plate 2. Decals
14
Connecting the Battery
No Parts Required
Procedure
Connect the battery; refer to your machine Operator’s
Manual .
Operation
Controls
Hazard Switch
Press the hazard switch ( Figure 37 ) to the O
N
position
to activate the front and rear flashing hazard lights.
g034583
Figure 37
1. Turn signal switch 3. Hazard switch
2. Horn button 4. Beacon switch (optional)
Turn-Signal Switch
Press down on the left side of the turn-signal switch
(
Figure 37 ) to activate the left-turn signal. The center
position is off.
Press down on the right side of the turn-signal switch
(
Figure 37 ) to activate the right-turn signal. The center
position is off.
Beacon Switch (Optional)
Press the beacon switch ( Figure 37 ) to activate the
beacon.
Horn Button
Press the horn button ( Figure 37 ) to activate the horn.
18