![background image](http://html1.mh-extra.com/html/toro/30332/30332_operators-manual_1133846030.webp)
30
Draining The Fuel Tank
1. Park the machine on a level surface, to assure fuel tank
drains completely. Then disengage the power take off
(PTO), set the parking brake, and turn the ignition key
to “OFF” to stop the engine. Remove the key.
2. Close fuel shut–off valve at fuel tank (Fig. 35).
Note: Remove fuel line from fuel valve that is closest to
the engine.
3. Squeeze the ends of the hose clamp together and slide
it up the fuel line away from valve (Fig. 35).
4. Pull the fuel line off the valve (Fig. 35). Open fuel
shut-off valve and allow gasoline to drain into a gas
can or drain pan.
Note: Now is the best time to install a new fuel filter
because the fuel tank is empty. Refer to Replacing the
Fuel Filter; page 30.
5. Install the fuel line onto the valve. Slide the hose
clamp close to the valve to secure the fuel line.
1
2
m–5185
Figure 35
1.
Fuel shut-off valve
2.
Clamp
Fuel Filter Service
Service Interval/Specification
Replace the fuel filter after every 200 operating hours or
yearly, whichever occurs first.
Replacing the Fuel Filter
Never install a dirty filter if it is removed from the fuel
line.
Note: Note the position of how the fuel filter is installed.
1. Disengage the power take off (PTO), set the parking
brake, and turn the ignition key to “OFF” to stop the
engine. Remove the key.
2. Close fuel shut–off valve at fuel tank (Fig. 35).
3. Squeeze the ends of the hose clamps together and slide
them away from the filter (Fig. 36).
4. Remove the filter from the fuel lines.
5. Install a new filter and move the hose clamps close to
the filter.
6. Open fuel shut-off valve at fuel tank (Fig. 35).
7. Check for fuel leaks and repair if needed (Fig. 35).
3
2
1
m–5234
3
1
Figure 36
1.
Hose clamp
2.
Fuel line
3.
Filter
Cutting Blade Service
To ensure a superior quality of cut, keep the blades
sharp. For convenient sharpening and replacement,
you may want to keep extra blades on hand.
A worn or damaged blade can break, and a piece
of the blade could be thrown into the operator’s
or bystander’s area, resulting in serious personal
injury or death.
•
Inspect the blade periodically for wear or
damage.
•
Replace a worn or damaged blade.
Warning
Summary of Contents for 30332
