Toro 30284, Operator'S Manual, Page: 20 / 64

Figure 14
40 inch, 48 inch, and 52 inch Mower Decks
1. Mower deck 4. Anti-Scalp Rollers
2. Bolt 5. Nut
3. Spacer
Figure 15
40 inch, 48 inch, and 52 inch Mower Decks
1. Mower deck 4. Bushing
2. Bolt 5. Anti-Scalp Rollers
3. Spacer 6. Nut
Figure 16
36 inch Mower Deck
1. Mower deck 4. Anti-Scalp Rollers
2. Bolt 5. Nut
3. Spacer
5. In certain mowing conditions and terrain, a
mismatch of cutting height may be seen. Adjusting
the outside anti-scalp rollers to the minimum setting
of 3/8 inch (10 mm) will help prevent the mower
deck cutting too low on the outside and minimize
the mismatch.
Adjusting the Handle Height
The handle position can be adjusted to match the
operator’s height preference.
1. Remove the hairpin cotter pins and clevis pins from
the drive levers and neutral locks (Figure 17).
Figure 17
1. Control rod 5. Left handle shown
2. Clevis pin 6. Neutral lock
3. Drive lever 7. Hairpin cotter pin
4. Operator Presence
Control lever (OPC)
20