Toro 30284, Operator'S Manual, Page: 11 / 64

110-4953
1. Fast 2. Continuous variable setting 3. Slow 4. Choke
Product Overview
Figure 2
1. Side discharge chute 4. Gas tank
2. Mower deck 5. Controls
3. Engine 6. Front caster
Controls
Become familiar with all the controls (Figure 3) before
you start the engine and operate the machine.
Figure 3
1. Throttle control 7. Neutral lock
2. Speed control lever 8. Operator Presence
Control levers (OPC)
3. Choke 9. Handle
4. Ignition switch 10. Drive Lever
5. Hour meter 11. Fuel shut-off valve
6. Blade control switch (PTO)
Throttle Control
The throttle control has two positions: Fast and Slow .
Choke
Use the choke to start a cold engine.
Operator Presence Control (OPC)
Levers
When you squeeze the OPC levers against the handles,
the OPC system senses that the operator is in the
normal operating position. When you release the OPC
levers, the OPC system senses that the operator has left
the normal operating position, and the system will stop
the engine if either the speed control lever is not in the
neutral position or the blade control (PTO) switch is
engaged.
11