Toro 266H Wheel Horse 72052, Operator'S Manual

Page: 28 / 40

Maintenance
26
Fuel Filter
Service Interval/Specification
Replace the fuel filter after every 100 operating hours
or yearly, whichever occurs first.
Replacing the Fuel Filter
Never install a dirty filter if it is removed from the
fuel line.
1. Disengage the power take off (PTO), set the
parking brake, and turn the ignition key to
“OFF” to stop the engine. Remove the key.
2. Close fuel shut–off valve at fuel tank (Fig. 27).
3. Open the hood.
4. Squeeze the ends of the hose clamps together
and slide them away from the filter (Fig. 29).
5. Remove the filter from the fuel lines.
1
2
3
1217
Figure 29
1. Hose clamp
2. Fuel line
3. Filter
6. Install a new filter and move the hose clamps
close to the filter.
7. Open fuel shut-off valve at fuel tank (Fig. 27).
8. Close the hood.