Toro 266H Wheel Horse 72052, Operator'S Manual

Page: 17 / 40

Operation
15
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. Raise the seat and loosen the adjustment knobs
(Fig. 10).
2. Slide the seat to the desired position and tighten
the knobs.
1
1202
Figure 10
1. Adjustment knob
Headlights
The headlights are turned on with a separate position,
“LIGHTS”, of the ignition switch (Fig. 11). The
lights are on while the ignition switch is in the
“LIGHTS” position even with the engine off.
Remove the key when the machine is left unattended
so lights can not be turned on discharging the battery.
1208
1
Figure 11
1. Lights
Positioning the
Tilt Steering Wheel
The steering wheel has four tilt locations. Position the
steering wheel where you have the best control of the
machine and are most comfortable.
1. Lift the tilt lever to release the lock (Fig. 12).
2. Move the steering wheel to a comfortable
position; then release the lever to lock.
1
2
1203
Figure 12
1. Tilt lever 2. Steering wheel