Brake Maintenance
Testing the Parking Brake
Service Interval:
Before each use or daily
1.
Engage the parking-brake; refer to
Parking-Brake Lever (page 14)
.
2.
Start the engine.
3.
Slowly attempt to drive the machine forward or
rearward.
4.
If the machine moves, contact your Authorized
Service Dealer for service.
Hydraulic System
Maintenance
Hydraulic System Safety
•
Seek immediate medical attention if fluid is injected
into skin. Injected fluid must be surgically removed
within a few hours by a doctor.
•
Ensure that all hydraulic-fluid hoses and lines are
in good condition and all hydraulic connections
and fittings are tight before applying pressure to
the hydraulic system.
•
Keep your body and hands away from pinhole
leaks or nozzles that eject high-pressure hydraulic
fluid.
•
Use cardboard or paper to find hydraulic leaks.
•
Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic
system.
Hydraulic Fluid
Specifications
Every 1,500 hours/Every 2 years (whichever
comes first)—Replace all moving hydraulic
hoses.
Hydraulic Tank Capacity:
23 L (6 US gallons)
Use only 1 of the following fluids in the hydraulic
system:
•
Toro Premium Transmission/Hydraulic Tractor
Fluid
(refer to your Authorized Service Dealer for
more information)
•
Toro PX Extended Life Hydraulic Fluid
(refer
to your Authorized Service Dealer for more
information)
•
If either of the above Toro fluids are not available,
you may use another
Universal Tractor
Hydraulic Fluid (UTHF
), but they must be only
conventional, petroleum-based
products. The
specifications must fall within the listed range for
all the following material properties and the fluid
should meet the listed industry standards. Check
with your hydraulic fluid supplier to determine if the
fluid meets these specifications.
Note:
Toro will not assume responsibility for
damage caused by improper substitutions, so use
only products from reputable manufacturers who
will stand behind their recommendations.
Material Properties
cSt at 40°C: 55 to 62
Viscosity, ASTM D445
cSt at 100°C: 9.1 to 9.8
41
Summary of Contents for 22983
Page 50: ...Notes...
