Toro 22983, Operator'S Manual

Page: 30 / 52

Installing the Filter
Important:
To prevent engine damage, always
operate the engine with the air filter and the cover
installed.
1. If you are installing a new filter, check the filter
for shipping damage.
Note:
Do not use a damaged filter.
2. Carefully slide the filter into the air-cleaner body
(
Figure 36 ).
Note:
Ensure that the filter is fully seated by
pushing on the outer rim while installing it.
Important:
Do not press on the soft, inside
area of the filter.
3. Install the air-cleaner cover and secure the
latches (
Figure 36 ).
Servicing the Engine Oil
Before each use or daily
After the first 5 hours/After the first
month (whichever comes first)—For Toro
engines—change the engine oil and filter.
Every 100 hours/Yearly (whichever comes
first)—For Toro engines—change the engine
oil and oil filter (more often in dirty or dusty
conditions).
Engine-Oil Specifications
Oil Type: Detergent oil (API service SF, SG, SH, SJ,
or SL)
Crankcase Capacity: 2.4 L (81 fl oz) with oil filter
Viscosity: See the table below.
g029683
Figure 37
Checking the Engine-Oil Level
1. Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
boom.
2. Shut off the engine and remove the key.
g194611
Figure 38
Changing the Engine Oil and Oil Filter
1. Park the machine on a level surface, engage
the parking brake (if applicable), and lower the
boom.
2. Shut off the engine and remove the key.
3. Drain the oil from the engine ( Figure 39 ).
30