Pre-Maintenance
Procedures
Using the Cylinder Locks
WARNING
The loader arms may lower when in the raised
position, crushing anyone under them.
Install the cylinder lock(s) before performing
maintenance that requires raised loader arms.
Installing the Cylinder Locks
1.
Remove the attachment.
2.
Raise the loader arms to the fully raised position.
3.
Shut off the engine and remove the key.
4.
Loosen the knob securing the cylinder lock to
the loader arm.
g359013
Figure 57
1.
Pin
3.
Hand knob
2.
Cylinder lock
5.
Slide the cylinder lock over the lift-cylinder rod.
g267536
Figure 58
1.
Cylinder lock
3.
Pin (2)
2.
Lift-cylinder rod
6.
Repeat step
and
for the other side of the
machine.
7.
Slowly
lower the loader arms until the cylinder
locks contact the cylinder bodies and rod ends.
8.
Secure the loader-valve lock; refer to
Loader-Valve Lock (page 14)
.
42
