7.
Loosen the jam nut and turn the tensioning
screw to release the tension.
g363401
Figure 89
1.
Tensioning screw
2.
Jam nut
8.
Remove the segment of the drive sprocket not
engaged with the track.
Important:
If you do not remove the
sprocket segment, it may be difficult to
install a new track without damaging it.
g361327
Figure 90
1.
Bolt (5)
2.
Sprocket half
9.
Start the machine and disengage the parking
brake.
10.
Move the traction control forward until the other
half of the drive sprocket is not engaged with
the track
g361325
Figure 91
11.
Shut off the engine and remove the key.
12.
Remove the track from the track frame, drive
hub, then front wheel.
Installing the Tracks
1.
Wrap the new track around the front wheel.
g361328
Figure 92
1.
Track
3.
Road wheel (4)
2.
Front wheel
4.
Rear wheel
2.
Push the track under and between the road
wheels and wrap it around the rear wheel.
3.
Start the engine and disengage the parking
brake.
4.
Move the traction control forward until the drive
sprocket half engages with the track.
g361324
Figure 93
5.
Shut off the engine and remove the key.
58
