Removing an Attachment
1.
Park the machine on a level surface.
2.
Lower the attachment to the ground.
3.
Shut off the engine and remove the key.
4.
Disengage the quick-attach pins by turning them
to the outside.
g003711
Figure 22
1.
Quick-attach pins
(engaged position)
3.
Engaged position
2.
Disengaged position
5.
If the attachment uses hydraulics, slide the
collars back on the hydraulic couplers and
disconnect them.
Important:
Connect the attachment hoses
together to prevent hydraulic system
contamination during storage.
6.
Install the protective covers onto the hydraulic
couplers on the machine.
7.
Start the engine, tilt the mount plate forward, and
back the machine away from the attachment.
Understanding the Smart
Load System
The Smart Load system also measures the hydraulic
pressure in the loader arm cylinders to determine the
maximum reach.
When you extend the loader arms to the maximum
reach for the arm height and load weight, the
InfoCenter will display the Smart Load icon and flash
the indicator light, an alarm will beep, and the arms
will stop extending.
To extend the loader arms further, lighten the load.
g270732
Figure 23
25
