2.
In the S
ETTINGS
M
ENU
, scroll down to the
P
ROTECTED
M
ENU
and press the right button.
g364601
Figure 17
3.
To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit.
Repeat this step until the last digit is entered and
press the right button once more.
g364599
Figure 18
4.
Press the middle button to confirm the PIN code.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
“PIN” displays in the upper right corner of the
screen.
You can view and change the settings in the
P
ROTECTED
M
ENU
. Once you access the P
ROTECTED
M
ENU
, scroll down to P
ROTECT
S
ETTINGS
option.
Use the right button to change the setting. Setting
the Protect Settings to O
FF
allows you to view and
change the settings in the P
ROTECTED
M
ENU
without
entering the PIN code. Setting the Protect Settings
to O
N
hides the protected options and requires you
to enter the PIN code to change the setting in the
P
ROTECTED
M
ENU
.
Specifications
Note:
Specifications and design are subject to
change without notice.
Width
116.8 cm (46.0 inches)
Length
215.6 cm (84.9 inches)
Height
143.5 cm (56.5 inches)
Weight
1750 kg (3858 lb)
Operating capacity (35% of tipping
capacity
1
)
589.7 kg (1300 lb)
•
Arms retracted
•
Arms extended
280 kg (618 lb)
Tipping capacity
1
1685 kg (3714 lb)
•
Arms retracted
•
Arms extended
792 kg (1746 lb)
Wheelbase
99.1 cm (39.0 inches)
Dump height (with standard bucket)
180.1 cm (70.9 inches)
•
Arms retracted
•
Arms extended
230.3 cm (90.7 inches)
Reach—fully raised (with standard
bucket)
33.5 cm (13.2 inches)
•
Arms retracted
•
Arms extended
67.8 cm (26.7 inches)
Height to hinge pin (with standard
bucket in highest position)
227.1 cm (89.4 inches)
•
Arms retracted
•
Arms extended
277.3 cm (109.2
inches)
1. The operating capacity is calculated as 35% of the tipping capacity with
a standard bucket and 75 kg (165 lb) operator, per ISO 14397-1. Other
attachments will have different operating capacities; refer to the Operator’s
Manual or load capacity decal for the attachment.
Attachments/Accessories
A selection of Toro-manufactured attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
Toro-manufactured attachments and accessories.
To ensure optimum performance, use genuine Toro
replacement parts and accessories. Toro accepts
no liability for machine damage or personal injury
that results from the use of other manufacturer
attachments. The user accepts the burden of these
risks.
18
