16
Cleaning
Before cleaning mower, stop motor, wait for all moving
parts to stop, and remove the key from the plug.
IMPORTANT: Do not clean mower with a garden
hose. Moisture can be trapped in mower and may
cause corrosion of internal parts.
After Every Use
•
Clean the underside of the mower housing. Be
particularly careful to keep the front cavity clear of all
debris (Fig. 22). Remove dirt and grass clippings with
a hardwood scraper. Avoid burrs and sharp edges.
2207
Figure 22
1.
Front cavity
•
Brush all debris off top of mower housing.
Once A Year
•
Remove top shroud (Fig. 23) and clean out any debris
underneath it with compressed air, a vacuum cleaner
or a brush.
2225
Figure 23
1.
Screw (4)
2.
Shroud
IMPORTANT: Do not use metal objects to clean
around battery. If metal objects contact the positive
and negative posts at the same time, this could short
the battery. The battery or conductor may overheat
and cause burns.
•
Check for any discolored or charred wires or switch
contacts. If any are damaged, see your Authorized
Toro Service Dealer for repairs.
Blade
Always mow with a sharp blade. A sharp blade cuts
cleanly and without tearing or shredding the grass blades
like a dull blade.
WARNING
POTENTIAL HAZARD
•
Motor could be started by someone
accidentally.
WHAT CAN HAPPEN
•
Accidental starting of motor could cause
serious injury to operator or bystanders.
HOW TO AVOID THE HAZARD
•
Do not attempt to inspect, remove or replace
blade without first removing the key from the
plug.
Summary of Contents for 20052
Page 19: ...19 ...
