3
Installing the New Cover
Parts needed for this procedure:
1
Cover
11
Hex-head bolt (1/4 x 5/8 inch)
1
Locknut (1/4 inch)
Procedure
1.
Align the new cover with the holes on the blower
assembly.
2.
Using the cover as the template, drill 1 hole (6.4
mm or 1/4 inch) into the blower chute (
).
g321825
Figure 2
1.
Drill a hole (6.4 mm or 1/4 inch) here.
3.
Secure the cover to the blower assembly using
the 11 hex-head bolts (1/4 x 5/8 inch) and 1
locknut (1/4 inch) as shown in
.
g322552
Figure 3
1.
New cover
3.
Blower assembly
2.
Hex-head bolt (1/4 x 5/8
inch)
4.
Locknut (1/4 inch)
4
