Figure 11
1.
Hex-head screw (3/8 x
2-3/4 inches)
4.
Spacer
2.
Flat washer (7/16 inch)
5.
Flange nut (3/8 inch)
3.
Alternator bracket
6.
Alternator
4.
Using cable ties, secure the engine crossover tube and
engine wire harness away from the alternator belt
(
).
Figure 12
1.
Engine wire harness
2.
Crossover tube
5.
Loosely install the hex-head flange screw (M8 x 20
mm) through the slot in the alternator bracket and the
hole in the alternator (
).
Figure 13
1.
Hole in the alternator
3.
Hex-head flange screw
(M8 x 20 mm)
2.
Slot in the alternator
bracket
6.
Slide the alternator belt over the pulley on the alternator
(
).
Figure 14
1.
Pulley
2.
Alternator belt
7.
Tension the alternator belt and ensure that it has 1.25
cm (1/2 inch) of flex when applying 4.5 kg (10 lb) of
force at mid-span.
8.
Tighten the hex-head flange screw (M8 x 20 mm).
6
