9
Installing the Groomer
Assembly and Optional
Broomer Kit
Groomer and Broomer Kits Come
Separately
Parts needed for this procedure:
4
Bolt (1/4 x 1-1/2 inches)
4
Jam nut
4
Shaft clamp
Installing the Groomer Kit
Ordered Separately
Model Number
Groomer Kit
03771
18 inch Groomer Blade Cartridge Kit
03772
22 inch Groomer Blade Cartridge Kit
03778
27-inch Groomer Blade Cartridge Kit
03766
18 inch Fairway QC Grooming Brush Kit
03767
22 inch Fairway QC Grooming Brush Kit
1.
Obtain a groomer blade cartridge kit or a brush
kit appropriate for your needs and cutting unit;
refer to the table above.
2.
Line up the groomer assembly with the
drive-stub shafts of the groomer drive box and
idler assembly (
).
g240752
Figure 16
1.
Drive-stub shaft
4.
Shaft clamp (4)
2.
Groomer assembly
5.
Bolt (4) Torque to 5 to 7
N∙m (46 to 60 in-lb)
3.
Jam nut (4)
3.
Secure the groomer to the machine as shown in
and snug the bolts.
4.
To prevent binding, set the height of cut and
height of groom, then loosen the bolts.
Note:
To set the height of cut refer to your
cutting unit
Operator’s Manual
; refer to
the Groomer Height (page 13)
for adjusting the
height of groom.
5.
Torque the bolts to 5 to 7 N∙m (46 to 60 in-lb).
6.
Check and adjust height of cut and height of
groom as necessary.
Installing the Broomer Kit
Part Number
Broomer Kit
132-7115
18-inch Broomer Kit
132-7125
22-inch Broomer Kit
133-8222
27-inch Broomer Kit
1.
Obtain an optional broomer kit for groomer
blade cartridges appropriate for your needs and
cutting unit; refer to the table above.
2.
Loosen the groomer blade-retaining nuts on
each end of the groomer shaft (
).
9
