Form No. 3416-524 Rev A
Pull Link Kit for DPA Reel Mower Groomer
Greensmaster
®
3250-D Series Traction Unit
Model No. 112-9248
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California
to cause cancer, birth defects, or reproductive harm.
Determine the left and right sides of the machine from the normal operating position.
Installation
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine and remove the key.
2
Installing the Front Carrier
Frames
Parts needed for this procedure:
2
Right link bracket
2
Left link bracket
4
Carriage bolt
4
Flat washer
4
Locknut
4
Bushing
4
Long pull-arm extension
4
Bolt—3/8 x 1-1/2 inches (2006 and earlier machines
only)
4
Roller shaft (2007 and after machines only)
4
Bolt—3/8 x 2 inches (2007 and after machines only)
8
Bushing (2007 and after machines only)
2006 and Earlier Machines
1.
Slide back the sleeve on the ball-joint receiver
and remove the receiver from the ball stud
(
).
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3416-524* A
