Toro 08839, Operator'S Manual

Page: 46 / 64

Lowering the Operator’s
Cushion
1. Loosen the 2 knobs that secure the operator’s
cushion to the control tower (
Figure 67 ).
Important:
The knobs are designed to
remain on the machine; loosen each knob
a only few turns, this prevents you from
accidentally stripping them free of the
retainers.
g333931
Figure 67
1. Knobs 2. Operator’s cushion
2. Lower the operator’s cushion ( Figure 67 ).
Raising the Operator’s
Cushion
1. Rotate up the operator’s cushion ( Figure 68 ).
Note:
Ensure that the slots in the frame of the
cushion are fully seated to the flange bushings
inboard of the knobs.
g333932
Figure 68
1. Operator’s cushion 2. Knobs
2. Tighten the 2 knobs ( Figure 68 ).
46