Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
Steering wheel
1
Install the steering wheel (Model
07266TC and 07273TC only).
2
No parts required
–
Activate the battery (Model 07266TC
and 07273TC only).
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Safety Training material
1
Registration Card
1
Predelivery Inspection Form
1
Certificate of Quality
1
3
Key
2
Read the Operator’s Manual and view
the training material before operating
the machine.
Note:
Determine the left and right sides of the machine
from the normal operating position.
1
Installing the Steering Wheel
Parts needed for this procedure:
1
Steering wheel
Procedure
Note:
This procedure is only needed for Model No.
07266TC and 07273TC.
1. Release the tabs on the back of the steering wheel
that hold the center cover in place. Remove the cover
2. Remove the nut and washer from the steering shaft.
3. Slide the steering wheel and washer onto the shaft.
Position the steering wheel on the shaft so that the
cross beam is horizontal when the tires are pointed
straight ahead and the thicker spoke of the steering
wheel is downward.
4. Secure the steering wheel to the shaft with the nut
(Figure 3). Torque the nut to 18-22 ft-lb (24-29 N-m)
Figure 3
1.
Steering shaft
5.
Washer
2.
Foam seal
6.
Nut
3.
Steering wheel
7.
Cover
4.
Tab slots in wheel
8.
Tabs in cover
5. Snap the center cover in place.
2
Activating the Battery
No Parts Required
Procedure
None
11
Summary of Contents for 07266TC
Page 10: ...99 7350 1 Maximum tongue weight is 50 lb 23 kg maximum trailer weight is 400 lb 181 kg 10...
Page 41: ...Notes 41...
Page 42: ...Notes 42...
Page 43: ...Notes 43...