Toro 04260, Installation Instructions Manual

Page: 15 / 16

5. Remove the flange locknut securing the driven
gear to the end of the groomer shaft (
Figure 30 ).
Remove the gear.
1
2
3
5
G018183
4
g018183
Figure 30
1. Drive gear 4. Groomer shaft
2. Driven gear lock nut 5. Idler gears
3. Driven gear
6. Remove the groomer drive gear from the reel
shaft (
Figure 30 ).
7. Remove the 4 screws securing the groomer
drive assembly to the rear mounting plate
(
Figure 31 ).
G018940
1
2
g018940
Figure 31
1. Groomer drive assembly 2. Screw
8. Remove the groomer shaft.
9. Torque the groomer drive gear to 170 N·m (125
ft-lb).
Note:
The use of an impact gun is not enough
to ensure proper installation. Failing to properly
torque the drive pulley can result in the assembly
unscrewing itself during operation.
15