Figure 7
1. Spring
3. Nut runner
2. Spring end under the frame 4. Move the spring end under
the kickstand spacer.
Step
3
Adjusting the Handle
No Parts Required
Procedure
1. Remove hairpin cotters from ring pins on each
side of mower (Figure 8).
Figure 8
1. Ring pins
2. While supporting handle, remove ring pins
from each side and raise or lower handle to
desired operating position (Figure 8).
3. Reinstall ring pins and hair pin cotters.
Step
4
Installing the Transport
Wheels
Parts needed for this step:
2
Transport wheels (Optional Transport Wheel
Kit, Model 04123)
Procedure
1. Push kick stand down with foot and pull up
on handle support until kick stand has rotated
forward, over center (Figure 9).
Figure 9
1. Kick stand
2. Press wheel locking clip toward the center
of wheel and slide wheel onto hex shaft
(Figure 10).
12
