Toro 03240, Installation Instructions Manual, Page: 2 / 24

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Prepare the machine.
2
Torque wrench (Not included)
–
Gather the tools required for setup.
3
No parts required
–
Determine the groomer gearbox
position.
Extended splined insert (right-hand
threads)
2
4
Extended splined insert (left-hand
threads)
1
Prepare the cutting unit.
Weight bracket 3
Hex-socket, button-head bolt (3/8 x 3/4
inch)
6
Groomer drive box (left drive) 2
5
Groomer drive box (right drive) 1
Install the weight bracket and groomer
drive box.
Idler assembly (left) 1
Idler assembly (right)
2
O-ring 3
Pivot hub 3
Socket-head screw (3/8 x 3/4 inch) 6
6
Locknut (3/16—thin) 6
Install the idler assembly.
Shoulder bolt 6
Hardened washer 3
Left HOC bracket assembly 3
Right HOC bracket assembly 3
7
Flange locknut (3/8 inch with 5/8 inch
hex)
6
Install the HOC bracket assemblies and
the front roller.
8
Cap (for universal groomer assemblies
with no rear roller brush kit installed
only)
3 Install the groomer drive cap.
Bolt (1/4 x 1-1/2 inches) 12
Jam nut 12
Shaft clamp 12
9
Grooming reel (order separately) 3
Install the groomer assembly (ordered
separately) and optional broomer kit.
10
Washer (Part No. 3256-24, not included)
–
Adjust the groomer spring force.
Carriage bolt (5/16 x 3-1/2 inches)
6
Spacer 6
Flange nut (5/16 inch) 6
11
Weight 18
Install the weights (groomer only, with
or without front grass baskets and rear
cutting unit without rear grass basket).
Carriage bolt (5/16 x 3-1/2 inches) 6
Spacer 6
Flange nut (5/16 inch) 6
12
Weight 12
Install the weights (with groomer and
rear roller brush).
2