INSTALLATION – M
ULTI
DECO 26/6 – M
ULTI
DECO 32/6i
300381 en – 06/02
Chap. 3.3.1 /9
3.3
MOVING THE MACHINE
If the machine has subsequently to be moved (for example in the event of a
move to different premises), ensure that the conditions and means of trans-
port comply with transport document 300369 supplied with all the machine
documentation.
3.3.1 Mechanical locking of lathe mobile units
Action
Notes
LOCKING
Locking devices
Set the yellow mechanical fixing
devices in place for locking pur
Use servicing tools
devices in place for locking pur-
poses
Use servicing tools
∆
Caution!
If the machine is moved subsequently, moving elements must be
locked.
Unlocking must not be performed until the machine has been set in
position.
⇒
Note:
Before moving the machine, clean it
in accordance with the instructions for “Regular cleaning” in the
“USE/MAINTENANCE” MANUAL.
>>>
