Page
21
of
26
3.6 M CODES
M Code
Definition
M0
Unconditional program stop.
M1
Conditional program stop.
M8
Start spraying.
M9
Stop spraying.
M10
Close main spindle collet.
M11
Open main spindle collet.
M32
Detector tool breakage check 1.
M33
Detector part presence check 1.
M34
Detector tool breakage check 2.
M35
Detector part presence check 2.
M36
Detector tool breakage check 3.
M37
Detector part presence check 3.
M38
Detector tool breakage check 4.
M39
Detector part presence check 4.
M60
New bar loading.
(must under all circumstances be programmed in op ISO)
M82
Barfeeder thrust enable.
M83
Barfeeder thrust off.
M84
Counter spindle ejector feed.
M85
Counter spindle ejector retraction.
(M108)
20 bar spraying at guidebush.
(M109)
20-bar coolant spraying at guidebush off.
M110
Close counter-spindle collet.
M111
Open counter-spindle collet.
M150
Feed hold.
M151
Cancel feed hold.
M160
Manipulator arm or part catcher feed.
