manualshive.com logo in svg

Tornatech GPD, Installation And Maintenance Manual, Page: 47 / 61

Share
Download
Tornatech GPD Installation And Maintenance Manual Download Page 47

 

 

47 

 

First Service Statistics 

History > Statistics > First Service Statistics 

 

 

This page allows the user to view the “First Setup Statistics”. The parameters are: 
From: 
 - Since:   Date of the first setup 
 - On Time:   Time the controller spent On, in DAYS-HOURS:MINUTES-SECONDS 
Engine: 
 - On Time:   Time the engine spent On, in DAYS-HOURS:MINUTES-SECONDS 
 - Start Count:   Number of times the engine has started 
 - Last Started on:   Last time the engine started 
Pressure: 
 - Minimum:   Smallest pressure value 
 - Minimum Occurred On:   Date the smallest value happened 
 - Maximum:   Biggest pressure value 
 - Maximum Occurred On:   Date the biggest value happened 
 - Average:   Average pressure since first start-up 
Temperature 
 - Minimum:   Smallest temperature value 
 - Minimum Occurred On:   Date the smallest value happened 
 - Maximum:   Biggest temperature value 
 - Maximum Occurred On:   Date the biggest value happened 
 - Average:   Average temperature since first start-up 
Jockey Pump Running 
 - On Time:   Time the Jockey Pump spent On, in DAYS-HOURS:MINUTES-SECONDS 
 - Start Count:   Number of times the Jockey Pump has started 
 - Last Started On:   Last time the Jockey Pump started 
 
 

Summary of Contents for GPD






























































Reviews:

No comments