3. OPERATING INSTRUCTIONS
T-OMPBM 12/2020
11
F. Troubleshooting
Occasionally air may enter the system and can cause a
vacuum lock. This is indicated by a greatly reduced
flow of liquid out of the end of the wand. Follow the
steps below to correct.
1.
Turn machine OFF.
2.
Pull wand trigger to remove all pressure from system.
3.
Pull black plastic towards wand while pulling coiled hose out of fitting
2.
P
ul
l H
os
e
D
ow
n
1. Pull Black Plastic Up to Release Hose
4. Point free end of hose into approved container.
5.
Turn unit ON until solution flows freely out of end
of hose.
6.
Turn unit OFF.
7.
Replace coiled hose back into wand by simply
pushing free end of hose back into fitting until fully
seated.
It is not necessary to pull the black
plastic back as hose will self lock when fully
inserted
.
