background image

6

CLEANING AGENTS

• 

 When using cleaning and care agents, the manufacturer’s danger warnings must   

be followed, and proper PPE must be worn per manufacturer’s instruction.
•  Only use low-foaming, non-combustible cleaning agents which DO NOT contain 
generally health-hazardous substances.
•  Use defoamer at all times to prevent damaging the vacuum motor.
•  Do not use citrus-based cleaners in this machine.
•  Please ensure that after each use, any chemical residue is rinsed out with clean 
water.

The manufacturer cannot accept responsibility for damage caused 

when the appliance is not used in accordance with the instructions 

provided or for uses other than those for which it was intended.

OPERATOR GUIDELINES

•  Wear suitable footwear to avoid slipping.
•  Wear suitable clothing to keep dry.
•  Do not smoke when using the machine.
•  Do not use excessively foaming or highly corrosive cleaning solutions.  If 
operating on a flooded floor, ensure that water depth does not exceed 
6mm (1/4 inch).

This machine is heavy. Do not attempt to lift the machine without 

assistance. Incorrect lifting techniques may result in personal injury.

Summary of Contents for TE010-G003-U




















Reviews: