Tornado TE010-G003-U Operation And Maintenance Manual Download Page 13

10

TRANSPORT AND STORAGE

Transport:

1.  Take extreme care when moving the machine up or down steps or stairs.
2.  Incorrect lifting techniques may result in personal injury.
3.  As stated earlier in this manual, this machine is heavy.  Do not attempt to lift the 

machine without assistance.

4.  Carefully wrap the power cord and store in a dry, indoor location.
5.  DO NOT expose the machine to rain or moisture.
6.  When transporting the machine, ensure that all components, tanks and 

removable parts are securely fastened and that the power cord and plug are not 
trailing.

7.  DO NOT lift or transport the machine while it contains liquid as this will add 

considerable weight to the unit.

Storage:

1.  Wrap the power cord around the power cord wrap hooks ensuring that the plug 

is not trailing on the floor.

2.  Always unplug, empty, wipe down and dry the machine after use.
3.  Both the solution and recovery tanks should be emptied and flushed out 

with clean water to ensure the seals and pumps are free from any cleaning 
detergents.

Store machine in a dry, indoor area only.

Summary of Contents for TE010-G003-U




















Reviews: