12
PREPARING THE MACHINE:
WARNING!!
To prevent possible disease hazard, before
attempting to clean bodily fluid spills, you must kill any
viruses, germs or bacteria present in the bodily fluid.
1.
Loosen the two latches that hold the recovery tank to the solution tank.
Lift the recovery tank off.
2.
Pour up to 2 gallons (7.6 liters) of hot water into clean solution tank.
Water temperature must not exceed 140
°
F (60
°
C). Pour in a non-
foaming cleaning concentrate to the proper dilution noted on the
container.
Be sure that the vacuum motor foam filter is in place
(located on top of the solution tank).
3.
Place the recovery tank on the solution tank and refasten the tank
latches. Attach hand tool to solution and vacuum hoses. Attach solution
hose to fitting on front of solution tank (98225 & 98226 only). Be sure
hose coupler locks onto extractor’s coupler. Connect vacuum hose to
recovery tank.
4.
Plug power cord into a grounded outlet. See GROUNDING
INSTRUCTIONS.
5. See “Illustrated Parts List and Wiring Diagram” for available
accessories.
