7
WHEN THE MACHINE IS DELIVERED
Check the carton carefully for signs of rough handling. Remove the machine from the carton. If the machine
is damaged, notify the carrier immediately and request an inspection. Be sure to keep the carton, packing
inserts, packing lists and carrier receipt until the inspector has verified your claim. Liability ceases when the
shipment is picked up by the carrier, but our customer service staff will be glad to furnish any information
needed in connection with the claim and will expedite the repair of the machine.
OPERATING INSTRUCTIONS
Filing the Pro Spotter
Disconnect the solution and recovery tanks. Add water and or chemicals to the lower solution tank. The
tank will hold up to 3.5 gallons
Operating the Pro Spotter
• Attach the solution feed line to the quick disconnect at the bottom of the machine.
• Attach the vacuum hose to the vacuum inlet (handle) above the recovery tank lid.
• Turn the 3-way switch to use either the pump and vacuum or the vacuum alone. (Allow approximaely 30
seconds for the pump to prime).
• Use the hand tool to spray and recover the solution.
• The float shut-off will disable the suction of the unit when the recovery tank is full. The operator will
notice a distinctive change in the sound of the vacuum motor when the shut-off is activated. Empty the
recovery tank, and then fill the solution tank, to resume cleaning.
Tank Latch
Solution Hose Attachment
Vacuum Attachment
Summary of Contents for Pro Spotter 98834
Page 3: ...3 NOTES...
