6
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk electric shock. This machine is equipped with a cord having
an equipment -grounding conductor and grounding plug. The plug must be inserted into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING
: Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated in sketch A.
GROUNDING
PIN
GROUNDING
OUTLET
GROUNDED
OUTLET BOX
A
• Replace a damaged cord immediately.
• If an extension cord is necessary, use a three conductor grounding cord-12 gauge wire or heavier to
prevent motor burnout and over-heating of wires
• Do not expose the machine to freezing temperatures.
• Do not use the machine for totally dry vacuuming. This machine is not fitted with a fine dust filter.
• Do not use citrus-based cleaners in this machine.
• Do not use cleaning chemicals in this machine except those recommended for commercial extraction
equipment. The use of any chemical with abrasive additives voids the warranty.
• Do not break off or pull out the ground prong on the plug.
• Do not attempt repair on a warranted machine unless instructions to perform it by an authorized shop
are obtained from the factory.
• Do not use any replacement parts except those specified on the parts list. Proper performance of the
machine could be affected if substitutions are made.
• Use defoamer at all times to prevent damaging the vacuum motor.
• Do not use water in excess of 140° F (62° C).
Failure to comply with the above warning instructions will void the warranty.
Summary of Contents for Pro Spotter 98834
Page 3: ...3 NOTES...
