background image

2

Long Term Buyer Protection Limited Warranty

10 Years*

Plastic water tanks and Rotationally-molded bodies

2 Years*

Parts on all Tornado cleaning equipment

1 Year*

Labor on all Tornado cleaning equipment

1 Year*

Warranty on batteries, one year prorated

All battery warranties are handled directly by the battery manufacturer, on a one year prorated basis

Tornado Industries, LLC. (Tornado) warrants to the end/user customer that the Tornado product(s) will 

be free from defects in material and workmanship for the duration(s) described below.  This limited 

warranty DOES NOT cover machines and/or components subject to normal wear and tear, damage 

that occurs in shipping, failures resulting from modification, accident, unsuitable operating environ

-

ment, misuse, abuse, neglect, or improper maintenance by you.  For full details, contact your Autho-

rized Tornado Distributor, Service Center, or the Tornado Technical Service Department.  Tornado 

sales and service representatives are not authorized to waive or alter the terms of this warranty, or to 

increase the obligations of Tornado under the warranty.

Terms subject to change without notice

1.  Except all Windshears™ Blowers, Storm, TV 2, Side and Downdraft, Insulation Blowers, CV 30, 

CV 38, CK14/1 PRO, CK 14/2 PRO, SWM 31/9, CK LW13/1, CV 38/48 Dual, PV6, PV10, and all 

chargers are warranted for 1 (one) year for both parts and labor.

2.  All non-wear item parts purchased after warranty expiration are warranted for 90 days.

3.  Warranty starts from the date of sale to the consumer or, at Tornado’s discretion, 6 months after 

the dealer purchased the unit from Tornado, whichever comes first.

4.  The EB 30 is warranted for a period of 90 days for both parts and labor.

5.  The warranty on engines used on propane powered equipment is limited to motor manufacturer’s 

warranty.

6.  Ride-on Scrubbers are warranted for 24 months, parts, 6 months labor or 1,000 hours, whichever 

occurs first.

Note:

 Tornado, The Latest Dirt, Floorkeeper, 

Carpetkeeper, Carpetrinser, Carpetrinser/Dryer, 

Headmaster, Taskforce, PAC-VAC, T-Lite, Glazer, 

Windshear, Max-Vac and Trot-Mop are trademarks 

of Tornado Industries

Website: www.tornadovac.com

Phone 1-800-VACUUMS

Fax (630) 818-1301

Address 333 Charles Court Suite 109

West Chicago, IL 60185

Form F2662.©2015.  All rights reserved

1-800-VACUUMS  

 

87 Years of Cleaning Innovation 

A Tacony Company 

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for 99726

























Reviews: