15
To do this, it is necessary to reach
the battery compartment as indi-
cated under paragraph “ACCESS
TO THE BATTERY COMPART-
MENT”.
2. Connect the machine connector
(2) to the batteries.
3. Close the battery compartment.
Recovery tank
Check that the cover of the suction
filter (1) is correctly secured, after
rotating the levers (2) and that the
suction motor hose (3) is correctly
connected to it.
Verify also that the squeegee hose
couplings (4) are correctly inserted
into the seats, that the exhaust hose
plug (5) placed in the front part of
the machine is closed and that the
inspection cap (6) is closed as well.
DETERGENT SOLUTION TANK
The capacity of the detergent solu-
tion tank is indicated in the techni-
cal data.
Open the screw plug placed in the
rear left part of the machine and
fill the detergent solution tank with
clean water at a maximum temper-
ature of 50°C. Add the liquid deter-
gent in the percentage and condi-
tions foreseen by the manufacturer.
To avoid excessive foam presence,
which could cause problems to the
suction motor, use the minimum
percentage of detergent. Screw
down the plug to close the tank.
ATTENTION:
Use always low foam detergent. To
avoid foam pres¬ence, before start-
ing working operation, introduce
into the recovery tank a minimum
quantity of anti-foam product.
Never use pure acid.
STARTING OF THE MACHINE
1.Turn the key (9) clockwise.
2.Check the battery type and the
charge level on the display (1).
3.Press the brushes motor switch
(6).
4.Press the suction motor switch
(3).
5.Press the solenoid valve switch
(5).
6.Lower the brushes base onto the
floor.
The machines which have the elec-
trical brushes base lifting press the
push button (7) of up/down of the
brushes base.
7.Acting upon the solution valve
lever (14) open and adjust the de-
tergent solution flow.
The water starts to flow automati
-
cally acting upon the levers drive
control (12). On the instrument
board the indicator of the solenoid
valve switch (5) will turn on. Re-
leasing these levers, the flow will
stop.
8.Acting upon the squeegee lifting
lever (17) lower the squeegee.
9.Acting upon the levers drive
control (12) the machine starts to
move, the brushes start to rotate
and the squeegee starts to dry.
10.During the first metres/feet,
check that the squeegee adjustment
guarantees a perfect drying action
and that the detergent solution flow
is appropriate. It has to be sufficient
to wet the floor uniformly avoid
-
ing the leakage of detergent from
the splash guards. Always consider
that the correct quantity of solution
detergent depends on type of floor,
dirtiness and machine speed.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
