8
MAINTENANCE OF THE PAD HOLDER
Remove the pad holder when the machine is not in use and hang on wall peg or similar
holder
POLISHING
Use 3/4” to 1” thick BEIGE high speed burnishing pads. Floors should be dry mopped to
remove grit.
SPRAY BUFFING
Use 3/4” to 1” thick HOG HAIR high speed burnishing pad. The spray buff solution should be
applied to the floor ahead of the machine. Do not run the machine into the spray or mist of
the spray buff solution.
DAMP BUFFING
Use 3/4” to 1” thick BEIGE high speed burnishing pad. Use a well wrung out mop to apply
damp buffing solution. Go over dampened surface with machine until surface is dry and has
a high glaze.
STORING
Store with pad off the floor by tilting machine back on the support wheels.
