7
STOPPING ENGINE
1.Turn fuel valve on tank to the closed position and allow the engine to continue running until
it runs out of fuel.
2. Turn the key to the off position.
Caution:
In an emergency, turn the key to the off position. Backfiring may occur when using
this method.
MOUNTING BRUSH AND OTHER ATTACHMENTS
(WARNING: TURN OFF UNIT BEFORE STARTING PAD INSTALL)
To mount or remove a pad, tilt the machine back until it rests on the back wheels. Unscrew
the pad-lock nut while gripping the pad and pad driver. Position a new pad concentric with
the pad driver and retighten with the pad-lock nut.
To remove the pad driver, first make sure the oil cap is tightly sealed.
Tilt the machine on its side. NOTE: Look for the, “THIS SIDE UP” decal on the side of the
machine.
The Honda engine can only be tilted on one side due to its carb
filter location.
Use a 3/4” wrench to hold the main shaft, which is located between the four bolts in the front
and on the top of the machine. Then, rotate the pad driver counterclockwise to unscrew it
from the main shaft.
For long life and best results always use genuine TORNADO® accessories.
