background image

4

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING:

Keep hands, feet, strings and ties away from all moving pants while the machine is in
operation. The exhaust system gets very hot so keep hands, clothing and any items that can
burn away from the engine while hot.

Tornado machines are built tough and durable, however do not abuse the machine

and the machine won't abuse you. With proper care and maintenance this unit will

give you trouble free operations for the years to come.

WARNING:
LETHAL EXHAUST GASES

Engine exhaust gases contain poisonous carbon monoxide. Carbon monoxide is odorless,
colorless, tasteless, and can cause death if inhaled. Although NFPA 588-4.5 says…” these
machines shall be permitted to be used in buildings frequented by the public”, the Tornado
Co. suggests to avoid inhaling exhaust flames and never run the engine in a closed building
or confined area without proper ventilation.

Although LPG burns more efficiently and emits less carbon monoxide than gasoline, some
carbon monoxide is produced. Avoid inhaling exhaust gases - especially over prolonged
periods of time. Do not allow engine to run unattended.

WARNING:
TO REDUCE THE RISK OF FIRE  OR INJURY

If handle switch lever is activated accidentally, high starting torque will cause machine to
move and may cause damage or injury.

The machine must not be running while :

x

  Leaving machine unattended

x

 Changing 

pads

x

  Attempting any maintenance or adjustment

These machines should not :

x

  Be used by unqualified or untrained personnel

x

  Be used unless properly maintained and adjusted

x

  Be used on areas with obstructions such as thresholds, etc.

x

  Be used in areas with loose tiles

x

  Be used in rooms without proper ventilation

Summary of Contents for 97435











Reviews: