The following screen appears when you Save / Apply the IP filter. The screen
lists the IP filters that were added from the previous screen. To change your
settings, click on the Add or Remove buttons.
IP Filtering—Incoming
Incoming filter filters the WAN traffic to the LAN side. Click on the Add button
to add incoming filter settings.
Enter a filter name, information about the source address (from the WAN
side), and information about the destination address (to the LAN side). Select
the protocol and WAN interface, then click on Save/Apply to add the setting.
You can view and delete the incoming filter settings from this screen.
-
31
-
