INSTALLATION
Install the Door Latch
1. Attach the door latch strike plate on the left front door with a Phillips screwdriver and two M3 screws.
2. Attach the door latch in the pocket on the right door with two M3 screws.
Install the Floodlights
1. Use a multimeter to verify the ground connection of both floodlights:
a. Measure the resistance between the floodlight's power connector ground pin (the middle pin on the
three-prong connector) and the floodlight's bracket screw.
b. Read the OHMS value that displays. The value should be less than 5 OHMS. If the value is greater than 5
OHMS, don't install the floodlight. Create a support ticket with Tormach Technical Support at
tormach.atlassian.net/servicedesk
for guidance on how to proceed.
2. Position one floodlight over the opening on the right top panel. Take care not to drop the light through the
opening into the enclosure.
Page 22
©Tormach® 2022
Specifications subject to change without notice.
tormach.com
TD10712: Installation Guide: 770MX Enclosure Kit (0522A)