3
D3109 PARTS INVENTORY
2
- Tie Down Receiver
2
- Bent Insert 17-7/8”
2
- 1/2” x 2” Hex Bolt
4
- 1/2” Flat Washer
2
- 1/2” Star Washer
2
- 1/2” Lock Washer
2
- 1/2” Hex Nut
2
- 1” x 2” Plate Washer
2
- 1/4” Snapper Pin
INSTALLATION INSTRUCTIONS:
LOCATE AND INVENTORY ALL PARTS TO BECOME FAMILIAR WITH ALL
BRACKETS READ AND UNDERSTAND ALL INSTRUCTIONS. MAKE SURE THE
VEHICLE IS IN PARK, ON A LEVEL SURFACE AND WHEELS ARE CHOCKED
BEFORE STARTING THE INSTALLATION.
2010 AND LATER MODEL VEHICLE INSTALLATION:
For 2003-2009 applications, refer to page 7
Step 1-
Starting on the passenger side, locate the section of frame where the
bumper bracket attaches near the end of the frame.
Step 2-
Remove the three factory bolts that attach the bumper bracket to the
frame. (Photo 2.1 & 2.2)
