Page7
Further adjustments can be made at the All Terrain Landing Gear
located at the bottom of the steps. From the middle position, the All
Terrain Landing Gear can be adjusted up or down as much as 1-1/2"
by changing the location of the push buttons on the side of the vertical
tubes.
The steps do not need to sit perfectly parallel to the ground to be
functional. The All Terrain Landing Gear feet may be adjusted
independently to match uneven ground surfaces.
The 1/4" x 1-3/8" Bail Pin MUST be installed in the
passenger or driver side step release lever before using
the steps. See figure 6.4.
Tubing button in
middle position
Figure 6.2
Summary of Contents for A8002
Page 2: ......
Page 3: ......
Page 14: ...Page9 Handle Latch Nylon Stud Figure 6 2 Figure 6 3 1 4 x 1 3 8 Bail Pin...
