Washroom Dispenser Service and Parts Manual
Tork Matic Hand Towel Roll Dispenser, H1 System, Elevation Design
5510202; 5510282
Revision Date: 3-13-18
5
of
16
Essity Internal
Replacing the plastic pinion gear & bearing
(P/N 225513) with a metal pinion gear & bearing:
FIRST: Lift up on bottom right
corner of cassette and hold up to get
at & remove lower screw.
Remove upper
screw second.
Overload
catch
Drum
shaft.
Gear
Pull cassette cover
back to expose gear
and overload catch.
(Gear & overload catch removed.)
Install the metal gear fully onto
drum shaft, and then replace
the overload catch.
Line holes on cover up with cassette and replace
screws. Actuate push bar to ensure all parts are
working properly