Washroom Dispenser Service and Parts Manual
Tork Matic Hand Towel Roll Dispenser, H1 System, Elevation Design
5510202; 5510282
Revision Date: 3-13-18
4
of
16
Essity Internal
1
2, 3
1. Use needle-nose pliers to remove the front part of the spring from the fitting hole.
2. Remove the rear part of the spring from the plastic pin.
3. To attach the new spring, first insert the rear part on the plastic pin, then insert the front part
of the spring into the fitting hole.
Replacing Spring for Cylinder: 203024E
Note: Be sure to order correct part.
Spring is color-coded. Red spring is for Tork Elevation. Blue Spring
is for Box 2000.
203024 Blue (Box 2000)
203024E Red (Elevation)
1
2, 3
1. Use needle-nose pliers to remove the front hook of the spring from the crank arm.
2. Unhook the spring from the cassette.
3. To mount the new spring, first insert the rear part and then place the front hook on the crank
arm.