8.2 ASTRONOMIC ON, TIME OFF AND/OR
TIME ON, ASTRONOMIC OFF
(Model DZS200A only)
Set astronomic ON/OFF per section 8.0 and 8.1
To set a time OFF during the night and/or a time
ON before sunrise, proceed as follows:
Press MODE key until schedule 01 appears
Press ENTER key repeatedly until the next blank
schedule screen appears. Use SELCT key to
select Channel 1 or Channel 2 (whichever one is
to be set for time ON or OFF during the night).
Set the hours, minutes, and days per sections 7.2 “a.”
and 7.3. You can first set an OFF during the night and
use the next blank schedule screen to set an ON
before dawn.
9.0 REVIEW MODIFY AND DELETE
Use MODE key to advance to any of the following
MODES:
1. CLOCK MODE: Use HOUR, MIN, and DAY
keys to modify existing settings. Press ENTER.
2. DATE MODE: Use MONTH, DATE, and YEAR
keys to modify existing settings. Press ENTER.
3. DST
È
Daylight Saving is automatic. You do
not have to enter start and stop dates. Unit cal-
culates 1st Sunday of April and last Sunday of
October. You do not have to remember to
change every year. To eliminate, press
ON/OFF key to OFF. Press ENTER.
11
SCH
4. SEASON MODE: Seasons duration can be
changed or deleted. Press MONTH and DATE
keys or DLETE key. Press ENTER to confirm.
5. HOLIDAY MODE: Similar procedure as above
can be used for the holidays. Press ENTER.
6. SIGNAL MODE: You can review previously
entered information. Use DLETE key to delete
or use SIG/SEC key to alter the duration. Press
ENTER to confirm.
To eliminate a signal time or all signal times, you
must eliminate those set points. By only setting
SIG duration to 00, it will act as SIG2 ON and
SIG1 OFF.
7. SCHEDULE MODE: Schedule review, modify,
delete. You can modify the schedule entry using
HOUR, MIN, ON/OFF (SIG/SEC) key and SELCT
key. Press ENTER after each modification.
To delete, simply press the DLETE key when
unwanted information is on display. This will
blank the entry. Press ENTER to confirm. Do
not leave the MODE without pressing ENTER.
8. ASTRO MODE: (Model DZS200A only) Press LAT
key to change latitude. Press ENTER. Press DAY
key and SELCT key to add or delete days in the
sunset mode. Press OFFSET key to change offset
time for sunset or sunrise. Press ENTER after each.
9. RUN MODE: Time and day is displayed. If today
is a programmed holiday, the H will be displayed
steady. If today falls within a programmed sea-
son, that season # will be displayed.
10.0 OVERRIDE
OVR1 and OVR2 (override keys) are effective only
in the run mode.
If a channel is scheduled for ON/OFF (non-signal
timer), then that channel will change the present load
12
