This means unit is ready to accept 2nd schedule
entry.
Use same procedure to set more SCHEDULES for
channel 1.
When you are finished setting schedules for chan-
nel 1, press SELCT key at the next blank sched-
ule screen and CH2 will flash. You can now begin
setting schedules for channel 2.
8.0 TO SET ASTRONOMIC SCHEDULE
(Model DZS200A only) .
IF YOU ARE SETTING MODEL DTS200A, SKIP
TO SECTION 9.0.
Press MODE key until display shows
Press SELCT key to toggle between channel 1
and channel 2.
By default, latitude north 10° will appear on the display.
The latitude of your location can be set in this mode.
Press LAT key to advance to the desired # from
10° to 60° north or 10° to 60° south. Press ENTER.
(Unit can not be used for latitudes greater than 60°).
Now display shows
9
CH 1
ON
CH 1
MO
CH
8.1 SELECTING ASTRO DAYS/SEASON(S)
(Model DZS200A only)
NOTE: Entering your latitude does not assign the
astronomic function. You must enter DAYS/SEASONS
while in the astro mode in order to enable this function.
Select the day(s) and/or season(s) in which you
want the indicated channel to turn ON at sunset.
This is done in the same way as section 7.3 “a.”
and 7.3 “b.” using DAY key and SELCT key.
If you want the load to come on after or before
sunset, you use the OFFSET key. A
÷
sign before
the last 2 digits means the load comes ON that
many minutes after sunset. A
–
sign means the
load comes ON that many minutes before sunset.
Once desired DAYS/SEASON and OFFSET is set
press ENTER.
Now display shows SUNRISE time along with all
days and seasons displayed.
ALL DAYS TURN OFF AT SUNRISE whether or
not those days were astro selected.
In this mode you can only set OFFSET for sunrise.
If you want the load to turn OFF before or after
sunrise, you use the OFFSET key. A
÷
sign
before the last 2 digits means the load turns OFF
that many minutes after sunrise. A
–
sign means the
load turns OFF that many minutes before sunrise.
Unit displays CH and ASTRO along with LATITUDE.
If channel 2 is to be astronomic, press SELCT key
to advance to CH2. Press ENTER. Repeat section
8.1. If the latitude was set in CH1, it will appear
again and need
NOT
be changed.
10
1
CH
MO
OFF
TU
WE
TH
FR
SA
SU
H
A
CH
1 2 3 4
SEASON
