Now display automatically advances to SIG2. If
you are not using SIG2, then leave 00 SEC. Press
ENTER.
NOTE:
If you do not set SIG2 duration (leaving it 00 SEC), then
make sure you never assign SIG2 in the scheduling as
it will act as a constant “ON” event for that channel.
Use same procedure to set signal durations for the
other channel if desired.
NOTE:
Each channel can have two independent durations.
7.0 SCHEDULE SET MODE
Press MODE key till display shows
In the SCHEDULE mode, the following information
is set:
1. CHANNEL selection (CH1 and CH2)
2. TIME: HOUR and MIN.
3. EVENT: ON or OFF (SIG1 or SIG2 for signal
channel, if any.)
4. DAY: DAY or DAYS combination.
5. HOLIDAY
6. SEASON: Use SEASON key to advance or
SELCT to select SEASON in which this particu-
lar TIME, EVENT and DAYS combination is to
occur.
NOTE: Duration for each season should have
been already established.
Now you are ready to begin setting the schedules.
There are a total of 99 ON/OFF events.
7
SCH
CH 1
7.1 CHANNEL SELECTION
Press SELCT key to toggle between channel 1
and channel 2. When desired channel flashes,
begin setting hours and minutes.
7.2 SETTING HOURS AND MINUTES
Press HOUR and MIN keys to desired setting.
a. If channel selected is being used for time ON or
time OFF, press ON/OFF key to desired setting.
or
b. If channel selected is being used as a signal timer
(you must have already set the signal durations)
press SIG/SEC key to set for signal 1 or signal 2.
7.3 SETTING DAYS, HOLIDAY, SEASONS
MO (Monday) is flashing - If Monday is desired,
press SELCT key. If Monday is
not desired, press
DAY key to pass Monday and advance to
Tuesday.
a. Press SELCT key to select the flashing day,
holiday, or season.
b. Press DAY key to pass the flashing day and
advance to other days, holiday, and seasons.
The same schedule will repeat on every holiday date.
Each season can have a different daily schedule.
NOTE: SELCT key can also be used to
delete a day,
holiday, or season
previously selected when the afore-
mentioned is flashing.
When you have desired time, event, steady days
and season, press ENTER. This completes the
first schedule entry.
Now display shows that SCH 02 appears on the display.
8
CH 1
