Washroom Dispenser Service and Parts Manual
Tork Foam Soap Auto Dispenser
572020A (White) - 572028A (Black)
Revision Date: 6-8-10
4. Replace the soap refill pouch holder.
5. The dispenser will turn “on” automatically once batteries are installed.*
You will hear a long beep signifying the unit is activated.
* If the dispenser appears non-functional, remove batteries, wait 4 minutes and re-
insert.
Battery Installation
1. Use the dispenser cabinet key to open the front
cover. Insert the key into the holes located at the top
of the dispenser, twisting the key, and pulling the
cover towards you. The cover is hinged at the bottom
of the dispenser.
2. Remove the soap refill pouch holder by pulling it straight up.
3. Insert four C-cell alkaline batteries (not included) making
sure to place batteries in the compartment in the proper
orientation as shown by the diagram in the battery
compartment.
4