background image

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

TORISHIMA PUMP MFG.CO.,LTD.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

TORISHIMA HONGKONG

 

Head Office & Works :

 

1−1−8, Miyata−cho, Takatsuki City, Osaka, Japan.   Phone : 0726−95−0551  Telex : 5336568 TORIPUJ Telefax: 0726−93−1288

TORISHIMA SINGAPORE

 

TORISHIMA SINGAPORE PTE.LTD.

30 Ubi Crescent # 01 ˘ 02 Ubi Tech Park Singapore 408566   Phone : (65)67790123  Fax : (65) 67796900

 

TORISHIMA HONGKONG LIMITED

Unit 603, 6/F., Tower III, Enterprise Square, 9 Sheung Yuet Road, Kowloon, Hongkong

 

Phone : (852) 2795−1838  Fax : (852) 2754−3293

TORISHIMA MALAYSIA

 

TORISHIMA MALAYSIA SDN.BHD

 

Suite 906, 19

th

 Floor, Kenanga International. Jalan Sultan Ismail, 50250 Kuala Lumpur

 

Phone : (603 ) 2715−0068  Fax : ( 603 ) 2715−0019

 

20/23 Woodside place Glasgow G3 7QF, Scotland, United Kingdom

TORISHIMA U.K.

 

EUROPE OFFICE    

 

Phone: (44) 1236−441632   Fax:(44) 1236−702875 

82B Daniels Road, Charlton, MA01507, United States of America

TORISHIMA U.S.

 

U.S. OFFICE    

 

Phone: (1 )866−374−1130   Fax:(1 )508−248−9321

5th Floor, office No.503, Al Salmeen Golden Tower, P.O Box.:72197, Electra Street, Abu Dhabi. U.A.E

 

Phone: (971)2−6743880 Fax:(971)2−6743881

TORISHIMA U.A.E

 

MIDDLE EAST OFFICE    

 

TORISHIMA INDONESIA

 

PT. TORISHIMA GUNA INDONESIA

JL Rawa Sumur Timur No.1, Pulogadung Industrial Estate, PO Box :1111 JAT., Jakarta 13011, Indonesia

 

Phone : (62)21−460−3963 (Hunting) Fax : (62)21− 460−3937

 

PT. TORISHIMA GUNA ENGINEERING

 

PT. GETEKA FOUNINDO

 

JL Rawa Sumur Timur No.1, Pulogadung Industrial Estate, PO Box :1111 JAT., Jakarta 13011

donesia

 

, In

Phone : (62)21−460−3963 (Hunting) Fax : (62)21− 460−3937

 

JL Pulo Ayang Kav AA2, Pulogadung Industrial Estate, PO Box :1111 JAT., Jakarta 13011, Indo sia

 

ne

Phone : (62)21−460−3963 (Hunting) Fax : (62)21− 460−3937

 

Summary of Contents for MMO

















Reviews: