Page
36
of
48
OPERATION
RAISING THE JACK
1. Position the jack near desired lift point.
2. Assemble the handle, ensuring that handle aligns with handle socket.
3. Close the release valve by turning it clockwise until it is firmly closed.
4. Before raising check and verify the load is centered and also has full contact with the lifting point.
5. Pump handle or squeeze air trigger to lift to desired lifting height. (To stop air operation, simply release
the grip on the lift control valve.) Continue to pump the jack handle to lift the vehicle to the desired
height. After lifting, support the load appropriately before starting work.
WARNING:
STOP PUMPING WHEN THE RAM RISES TO THE RED STOP MARK
ON THE RAM. THIS WILL PREVENT THE JACK FROM POSSIBLE MALFUNCTION AND
IMPROPER USE.
CAUTION:
NEVER WIRE, CLAMP OR OTHERWISE DISABLE THE LIFT CONTROL VALVE TO
FUCTION BY ANY MEANS OTHER THAN BY USING THE OPERATOR'S HAND. USE THE HANDLE
PROVIDED WITH THIS PRODUCT OR AN AUTHORIZED REPLACEMENT HANDLE TO ENSURE PROPER
RELEASE VALVE OPERATION. DO NOT USE EXTENSIONS ON THE AIR HOSE OR ON THE OPERATING
HANDLE.
AIR/HYDRAULIC CLEVIS BASE LONG RAM JACK