Page
23
of
48
BEFORE USE
5.
Before using this product, read the owner's manual completely and familiarize yourself thoroughly with
the product and the hazards associated with its improper use.
6.
Perform the air purge procedure. (See previous instructions for system purge procedure.)
7.
Check and that the pump operates smoothly before putting into service.
8.
Inspect before each use. Do not use if bent, broken or cracked components are noted.
OPERATION
RAISING THE JACK
6. Position the jack near desired lift point.
7. Assemble the handle, ensuring that handle aligns with handle socket.
8. Close the release valve by turning it clockwise until it is firmly closed.
9. Before raising check and verify the load is centered and also has full contact with the lifting point.
10. Pump handle to lift to desired lifting height. After lifting, support the load appropriately before starting
work.
CLEVIS BASE LONG RAM JACK
