Torin BIG RED TY10003, Owner'S Manual, Page: 11 / 58

11
TO ADD JACK OIL:
The hydraulic cylinder assembly contains hydraulic fluid that must be kept at approximately 80% full at all
times for proper operation. To check the level and to fill remove oil filler plug.
1. Remove the bleeder screw.
1. Remove the bleeder screw. 2. Turn the Pump Unit on its side so that old oil will
drain from the oil fill hole.
2. Set Pump Unit on a level surface. Add0.22 quarts
(about 7.43oz., or 630ml) of oil.
Use a high grade anti-foaming hydraulic oil.
KEEP DIRT AND OTHER MATERIALS CLEAR
WHEN POURING.
3. Replace the bleeder screw.
4. Perform the Air Purge Procedure.
TO REPLACE JACK OIL